BMW fault codes and what they mean

BMW modules store their own fault codes, not just the generic OBD2 ones. Enter a code to see what it means, or choose a module.

A warning light on? What each BMW warning light means. DME, FRM, RDC? BMW module names explained.

Common BMW fault codes

The codes people look up most, each with what to check first:

  • A8C1 (Lights Module) LM: Reversing light, right, faulty
  • A8A8 (Lights Module) LM: High beam/turn-off light, left, faulty
  • A8C3 (Lights Module) LM: E63/E64/E65: front right direction indicator 2 faulty; E60/E61: right brake light 2 faulty; RR US: rear right direction indicator 2 faulty
  • 930C (Driver's side footwell module) FRM: Side marker light, left faulty
  • 9CBF (Driver's side footwell module) FRM: Communication with step motor controller on the left disrupted
  • 9CCF (Driver's side footwell module) FRM: Drive, pivoting, mirror, driver's side, faulty
  • D904 (Car Access System) CAS: K-CAN wire fault
  • E584 (Driver's side footwell module) FRM: K-CAN wire fault
  • A125 (Car Access System) CAS: incorrect or implausible signal from engine management
  • A6DE (Junction Box electronics) JBE: Mirror/washer nozzle heating
  • 2856 (Engine electronics) DME: Valvetronic, eccentric shaft sensor: guide
  • 286C (Engine electronics) DME: Valvetronic servomotor, power supply
  • 46D3 (Engine electronics) DDE: Control module, internal 4
  • 932D (Junction Box electronics) ZGM/SGM-ZGM: Control-module fault (memory error)
  • 93C8 (Crash safety module) MRS: Airbag front sensor, left
  • E706 (Automatic heating/air conditioning) IHKA: Heater - A/C systems, LIN bus fault
  • 5208 (Transfer case) VTG: Supply, servomotor
  • 6460 (Longitudinal dynamics management) ICM: SZL: initialization phase not yet finished
  • 4F6F (Transmission control) EGS: Highly irregular rotation
  • 5658 (Transmission control) EGS: Transmission-position sensor: malfunction
  • 40A1 (Engine electronics) DDE: Alternator load signal
  • 63F8 (Electronic Power Steering) End stop not learned
  • AAF9 (Park distance control) Ultrasonic sensor, rear outer left, signal line: short circuit to ground or open circuit
  • A7C8 (High Beam Assist) Temperature outside operating range
  • D9C4 (Power module) PM: K-CAN line fault
  • 581D (Transmission control) EGS: signal fault, wheel centrifugal velocity rear right from DSC
  • 9CBE (Driver's side footwell module) FRM: Communication with step motor controller on the right disrupted
  • A0C8 (Car Access System) CAS: Continuous signal, lock cylinder, driver's door
  • 931C (Instrument cluster) KOMBI: Display-heater short circuit
  • 2862 (Engine electronics) DME: Variable valve gear - voltage supply, power output stage, bank 1
  • 9C52 (Automatic heating/air conditioning) IHKA: Ventilation flap motor
  • 9C48 (Automatic heating/air conditioning) IHKA: Fresh air/recirculated air flap motor, left
  • 2D9F (Engine electronics) Intake camshaft sensor, plausibility: Signal implausible
  • 2CA2 (Engine electronics) Wastegate valve, activation: Short circuit to ground
  • 93B0 (Crash safety module) ACSM: Head airbag, left
  • 47C7 (Engine electronics) DDE: Injector, cylinder 6, activation
  • 5FE1 (Electronic Damper Control) EDC: Steering angle, correction value exceeded
  • 0094 (Engine electronics) Line fault DWA/EWS input (short circuit or open circuit)
  • 930D (Lights Module) LM: Clearance light, right (E60, E65), outer (E60 Halogen), faulty

How BMW fault codes work

Every control module in a BMW (the engine, transmission, brakes, airbags, lights, climate and the rest) keeps its own fault memory. Each fault is stored as a code of 4 or 6 hexadecimal digits, like 2A82 or 801C10, with details such as how often it happened, the mileage, and conditions like voltage and temperature. The same code can mean different things in different modules, and in different versions of one module, which is why each code here is listed by module.

These are not the P-codes (P0300 and so on) that a generic OBD2 code reader shows. OBD2 covers emissions only: the engine, and the transmission where it affects emissions. A BMW's other modules, and most of the engine's own codes, are read with BMW's diagnostic protocols, which AutoLingo for BMW speaks.

By module

Questions

Why does my OBD2 scanner show no codes when a warning light is on?
A generic OBD2 scanner reads only the emissions faults. A warning light for the brakes, airbags, lights or body electronics comes from a fault stored in that module, which only a tool speaking BMW's own protocols can read.
Are BMW fault codes the same as P-codes?
No. P-codes are the generic emissions codes every car since 1996 shares. BMW modules store their own hexadecimal codes, like 2A82, with far more detail; the engine module stores both.
Can I clear BMW fault codes myself?
Yes, with a tool that speaks BMW's protocols, such as AutoLingo for BMW. Clear a fault after the repair: if the problem is still there, the fault comes right back, and so does its warning light.
Why does one code have several meanings?
BMW numbered codes per module and per module version, so the same code means one thing in the engine module and another in the lights module, or in an older version of the same module. AutoLingo for BMW reads which version your car has and shows the right meaning.