BMW satellite, door, front left fault codes

The 77 fault codes the satellite, door, front left can store, and what each one means. Some codes mean different things in different versions of the module; tap a code to see which applies to your car.

On: Z4 (E85), Z4 (E86)

  • 9628 STVL: Processor: reset
  • 9629 STVL: Control-module fault (clock monitor reset µP)
  • 962A STVL: Control-module fault (illegal Opcode)
  • 962B STVL: Incorrect chassis number
  • 962C STVL: System time fault
  • 962D Timeout ID 01H (STVL)
  • 962E Timeout ID 02H
  • 962F STVL: No message (3) from satellite, door, front right
  • 9630 Timeout ID 04H
  • 9631 STVL: No message (5) from satellite, B-pillar, left
  • 9632 Timeout ID 06H ()
  • 9633 STVL: No message (7) from satellite, B-pillar, right
  • 9634 Timeout ID 08H (SASR)
  • 9635 STVL: No message (9) from safety information module
  • 9636 STVL: No message (A) from safety information module
  • 9637 STVL: No message (B) from satellite, B-pillar, left
  • 9638 STVL: No message (C) from satellite, B-pillar, right
  • 9639 STVL: No message (D) from safety information module
  • 963A Timeout ID 0EH
  • 963B Timeout ID 0FH
  • 963C STVL: No message (20) from satellite, B-pillar, left
  • 963D STVL: No message (21) from satellite, B-pillar, right
  • 963E Timeout ID 22H ()
  • 963F STVL: No message (71) from safety information module
  • 9640 STVL: Coding/data error
  • 9641 STVL: Control-module fault (stack overflow)
  • 9642 STVL: Self-test: too few messages
  • 9643 STVL: Self-test: data error in message
  • 9644 STVL: Self test: transmission error
  • 9645 STVL: Implausible crash severity
  • 9646 Short circuit or open circuit H/L-side switch ZK1 (E85: not assigned)
  • 9647 Short circuit ZK1 (E85: unassigned) to ground
  • 9648 Short circuit ZK1 (E85: unassigned) to positive
  • 9649 Resistance ignition cartridge ZK1 (E85: unassigned) too low
  • 964A Resistance ignition cartridge ZK1 (E85: unassigned) too high
  • 964B Resistance ignition cartridge ZK1 (E85: unassigned) not measured
  • 964C ZK1 interrupted (E85: not assigned)
  • 964D Voltage ZK1 (E85: not occupied) not in order
  • 964E ignition capacitor ZK1 (E85: unassigned) not OK
  • 964F Coding/Configuration ZK1 (E85: unassigned) inconsistent
  • 9650 Open circuit discharge circuit ZK1 (E85: not assigned)
  • 9651 Short circuit or open circuit H/L-side switch ZK2 (E85: not assigned)
  • 9652 Short circuit ZK2 (E85: unassigned) to ground
  • 9653 Short circuit ZK2 (E85: unassigned) to positive
  • 9654 Resistance ignition cartridge ZK2 (E85: unassigned) too low
  • 9655 Resistance ignition cartridge ZK2 (E85: unassigned) too high
  • 9656 Resistance ignition cartridge ZK2 (E85: unassigned) not measured
  • 9657 ZK2 interrupted (E85: not assigned)
  • 9658 Voltage ZK2 (E85: not occupied) not in order
  • 9659 ignition capacitor ZK2 (E85: unassigned) not OK
  • 965A Coding/Configuration ZK2 (E85: unassigned) inconsistent
  • 965B Open circuit discharge circuit ZK2 (E85: not assigned)
  • 965D STVL: Control-module fault (error in alarm path)
  • 965E STVL: Control-module fault (algorithm parameter inconsistent)
  • 965F STVL: Control-module fault (EAM parameter inconsistent)
  • 9660 STVL: Firing attempt taken place
  • 9661 STVL: Control-module fault (pressure sensor parity error)
  • 9662 STVL: Pressure sensor
  • 9663 STVL: Control-module fault (pressure sensor data range settling error)
  • 9664 STVL: Control-module fault (pressure sensor EEPROM inconsistent)
  • 9665 STVL: Control-module fault (pressure sensor self-test timeout)
  • 9666 STVL: Control-module fault (pressure sensor filter error)
  • 9667 STVL: Control-module fault (COP-Watchdog defective)
  • 9672 STVL: Control-module fault (pressure sensor data range implausible)
  • 9673 STVL: Control-module fault (pressure sensor pressure delta implausible)
  • 9674 STVL: Control-module fault (pressure sensor error in test 1)
  • 9675 STVL: Control-module fault (pressure sensor error in array test)
  • 9676 STVL: Control-module fault (pressure sensor error SIORX overrun)
  • 9677 STVL: Transport mode active
  • 9678 STVL: Control-module fault (communication with ignition IC disrupted)
  • 9679 STVL: Control-module fault (short circuit or open circuit low-side switch ZK1)
  • 967A STVL: Control-module fault (short circuit or open circuit high-side switch ZK1)
  • 967B STVL: Control-module fault (short circuit or open circuit low-side switch ZK2)
  • 967C STVL: Control-module fault (short circuit or open circuit high-side switch ZK2)
  • 967D STVL: Voltage supply: limit value undershot
  • 967E STVL: Voltage supply: limit value exceeded
  • 967F STVL: Coding-data fault

Every BMW module's fault codes