BMW fault code D368
Dynamic stability control
In the dynamic stability control, code D368 means different things depending on the version of the module in the car. Find your car below; the app shows the right one for yours.
No message (LWS steering box, 0xC3), receiver DSC, transmitter LWS/RAD
Module versions: Dynamic stability control DSC8 (DSC_60), Dynamic Stability Control DSC8 Plus (DXC8_P)
In: 1 Series (E87) 2004–2011, 1 Series (E82) 2007–2013, 1 Series (E81) 2007–2011, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010, X1 (E84) 2009–2015, Z4 (E89) 2009–2016
CAN message: PT_CAN_ST_ELUP ID:0x8D
Module version: Stability system EBC_450 (DSC_56)
Which BMWs have this version depends on the engine and equipment, so we don't list them here; AutoLingo for BMW reads which version your car has.
Signal (electrical vacuum pump) invalid
Module version: Dynamic stability control MK60 (DSC_87)
In: 1 Series (E87) 2004–2011, 1 Series (E81) 2007–2011, 1 Series (E82) 2007–2013, 1 Series (E88) 2008–2013, 3 Series (E90) 2005–2012, 3 Series (E91) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
No message (LWS steering box, 0xC3), receiver DSC, transmitter SZL/LWS
Module version: Dynamic stability control EHB3 (DXC_70)
In: 1 Series (E87) 2004–2011, 1 Series (E81) 2007–2011, 1 Series (E82) 2007–2013, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
D368 - PT-CAN: Message RWDT_STEA_WHL (ID 0x0C3) not received or incorrect message length (DLC). [Sender: SZL]
Module version: Dynamic Stability Control DSC8 Plus (DXC_90)
In: 1 Series (E87) 2004–2011, 1 Series (E82) 2007–2013, 1 Series (E81) 2007–2011, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
Reading and clearing it
Fault code D368 is a BMW code, stored in the car's dynamic stability control, not a generic OBD2 code (P0xxx): a generic OBD2 reader only reaches the engine's emissions faults, so it won't show it. AutoLingo for BMW reads it with BMW's own diagnostic protocols, in plain English, with the details the module stored about it, and clears it after a repair. If a fault comes right back after it's cleared, the problem is still there.
The dynamic stability control is on: 5 Series (E60), 5 Series (E61), 6 Series (E63), 6 Series (E64), 7 Series (E65), 7 Series (E66), 7 Series (E67), X5 (E70), X6 (E71), X6 (E72), 1 Series (E81), 1 Series (E82), X1 (E84), 1 Series (E87), 1 Series (E88), Z4 (E89), 3 Series (E90), 3 Series (E91), 3 Series (E92), 3 Series (E93)
Coming soon
Enter your email address to hear when AutoLingo for BMW is ready.