BMW fault code D364
Dynamic stability control
In the dynamic stability control, code D364 means different things depending on the version of the module in the car. Find your car below; the app shows the right one for yours.
D364 - PT-CAN: Network management message (ID 0x480) not received or incorrect message length (DLC).
Module versions: Dynamic stability control EHB3 (DSC_60PP), Dynamic Stability Control DSC8 Plus (DXC8_P)
In: 1 Series (E87) 2004–2011, 1 Series (E82) 2007–2013, 1 Series (E81) 2007–2011, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
Message error EGS, receiver DSC, transmitter JBE
Module version: Stability system EBC_450 (DSC_56)
Which BMWs have this version depends on the engine and equipment, so we don't list them here; AutoLingo for BMW reads which version your car has.
CAN error: message NM_PT_CAN (ID 0x480) missing!
Module version: Dynamic stability control DSC8 (DSC_60)
In: 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010
Message (KOMBI, 0x194) missing, receiver DSC, transmitter KOMBI
Module version: Dynamic stability control MK60 (DSC_87)
In: 1 Series (E87) 2004–2011, 1 Series (E81) 2007–2011, 1 Series (E82) 2007–2013, 1 Series (E88) 2008–2013, 3 Series (E90) 2005–2012, 3 Series (E91) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
D364 - PT-CAN: message NETWORK_MANAGEMENT; ID 0x480) not received or incorrect message length; DLC --- (DSC: message (SGM-SZM 480) missing)
Module version: Dynamic stability control EHB3 (DXC_70)
In: 1 Series (E87) 2004–2011, 1 Series (E81) 2007–2011, 1 Series (E82) 2007–2013, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
DSC: No message (SGM-SZM 480)
Module version: Dynamic Stability Control DSC8 Plus (DXC_90)
In: 1 Series (E87) 2004–2011, 1 Series (E82) 2007–2013, 1 Series (E81) 2007–2011, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
Reading and clearing it
Fault code D364 is a BMW code, stored in the car's dynamic stability control, not a generic OBD2 code (P0xxx): a generic OBD2 reader only reaches the engine's emissions faults, so it won't show it. AutoLingo for BMW reads it with BMW's own diagnostic protocols, in plain English, with the details the module stored about it, and clears it after a repair. If a fault comes right back after it's cleared, the problem is still there.
The dynamic stability control is on: 5 Series (E60), 5 Series (E61), 6 Series (E63), 6 Series (E64), 7 Series (E65), 7 Series (E66), 7 Series (E67), X5 (E70), X6 (E71), X6 (E72), 1 Series (E81), 1 Series (E82), X1 (E84), 1 Series (E87), 1 Series (E88), Z4 (E89), 3 Series (E90), 3 Series (E91), 3 Series (E92), 3 Series (E93)
Coming soon
Enter your email address to hear when AutoLingo for BMW is ready.