BMW fault code C996
Dynamic stability control
In the dynamic stability control, code C996 means different things depending on the version of the module in the car. Find your car below; the app shows the right one for yours.
C996 - F-CAN SZL wheel speed plausibility, communication with DSC, wheel speed < 300 km/h
Module version: Dynamic stability control MK60 (DSC_87)
In: 1 Series (E87) 2004–2011, 1 Series (E81) 2007–2011, 1 Series (E82) 2007–2013, 1 Series (E88) 2008–2013, 3 Series (E90) 2005–2012, 3 Series (E91) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
DSC: Insignificant SZL fault: clear fault memory (F-CAN SZL wheel speed plausibility communication with DSC wheel speed <300km/h DSC insignificant)
Module version: Dynamic stability control EHB3 (DXC_70)
In: 1 Series (E87) 2004–2011, 1 Series (E81) 2007–2011, 1 Series (E82) 2007–2013, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
DSC: Insignificant SZL fault: clear fault memory (SZL fault entry for SZL steering angle sensor error signal or value above threshold wheel speed > km/h F-CAN wheel speed communication with DSC)
Module version: Dynamic Stability Control DSC8 Plus (DXC_90)
In: 1 Series (E87) 2004–2011, 1 Series (E82) 2007–2013, 1 Series (E81) 2007–2011, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016
Reading and clearing it
Fault code C996 is a BMW code, stored in the car's dynamic stability control, not a generic OBD2 code (P0xxx): a generic OBD2 reader only reaches the engine's emissions faults, so it won't show it. AutoLingo for BMW reads it with BMW's own diagnostic protocols, in plain English, with the details the module stored about it, and clears it after a repair. If a fault comes right back after it's cleared, the problem is still there.
The dynamic stability control is on: 5 Series (E60), 5 Series (E61), 6 Series (E63), 6 Series (E64), 7 Series (E65), 7 Series (E66), 7 Series (E67), X5 (E70), X6 (E71), X6 (E72), 1 Series (E81), 1 Series (E82), X1 (E84), 1 Series (E87), 1 Series (E88), Z4 (E89), 3 Series (E90), 3 Series (E91), 3 Series (E92), 3 Series (E93)
Coming soon
Enter your email address to hear when AutoLingo for BMW is ready.