BMW fault code 5F08

Dynamic stability control

In the dynamic stability control, code 5F08 means different things depending on the version of the module in the car. Find your car below; the app shows the right one for yours.

Message (ACC sensor, 0xAD) incorrect, receiver DSC, transmitter ACC (DSC-ACC interface sends not alive PT-CAN ID signal)

Module versions: Dynamic Stability Control DSC8 Plus (DXC8_P), Dynamic Stability Control DSC8 Plus (DXC_90)

In: 1 Series (E87) 2004–2011, 1 Series (E82) 2007–2013, 1 Series (E81) 2007–2011, 1 Series (E88) 2008–2013, 3 Series (E91) 2005–2012, 3 Series (E90) 2005–2012, 3 Series (E92) 2006–2013, 3 Series (E93) 2007–2013, 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010, X1 (E84) 2009–2015, X5 (E70) 2006–2013, X6 (E71) 2008–2014, X6 (E72) 2009–2011, Z4 (E89) 2009–2016

DSC longitudinal acceleration sensor value unchanged for too long

Module version: Stability system EBC_450 (DSC_56)

Which BMWs have this version depends on the engine and equipment, so we don't list them here; AutoLingo for BMW reads which version your car has.

Message (ACC sensor, 0xAD) incorrect, receiver DSC, transmitter ACC (alive error ID)

Module version: Dynamic stability control DSC8 (DSC_60)

In: 5 Series (E60) 2003–2010, 5 Series (E61) 2004–2010, 6 Series (E63) 2003–2010, 6 Series (E64) 2004–2010

DSC: Active Cruise Control has shut down

Module version: Dynamic stability control DSC5.7 (DSC_E65)

In: 7 Series (E65) 2001–2008, 7 Series (E66) 2002–2008, 7 Series (E67) 2002–2008

Reading and clearing it

Fault code 5F08 is a BMW code, stored in the car's dynamic stability control, not a generic OBD2 code (P0xxx): a generic OBD2 reader only reaches the engine's emissions faults, so it won't show it. AutoLingo for BMW reads it with BMW's own diagnostic protocols, in plain English, with the details the module stored about it, and clears it after a repair. If a fault comes right back after it's cleared, the problem is still there.

The dynamic stability control is on: 5 Series (E60), 5 Series (E61), 6 Series (E63), 6 Series (E64), 7 Series (E65), 7 Series (E66), 7 Series (E67), X5 (E70), X6 (E71), X6 (E72), 1 Series (E81), 1 Series (E82), X1 (E84), 1 Series (E87), 1 Series (E88), Z4 (E89), 3 Series (E90), 3 Series (E91), 3 Series (E92), 3 Series (E93)

← 5F07 All dynamic stability control fault codes 5F09 →